Rupture Disc Sizing Document – by Fike

Introduction

This document discusses how to size a rupture disc.
- Equations
- Parameters

This is a nice technical bulletin from Fike, for those who are interested in Engineering and Sizing.

 

Cited References
1. American Society of Mechanical Engineers, Boiler and Pressure Vessel Code Section VIII, Division 1
2. American Society of Mechanical Engineers, PTC25
3. American Petroleum Institute, RP520
4. Crane Valves, Technical Paper 410
5. Crane Valves, Crane Companion Computer Program
6. Fike Technical Bulletin TB8100 ASME Code and Rupture Discs
7. Fike Technical Bulletin TB8103 Certified Combination Capacity Factors
8. Fike Technical Bulletin TB8104 Certified KR and MNFA Values
9. Fike Technical Bulletin TB8105 Best Practices for RD & PRV Combinations
10. DIERS Project Manual
11. CCPS Guidelines for Pressure Relief Effluent Handling Systems

 

Source

https://www.fike.com/en_gb/knowledge-center/product-literature/rupture-disc-sizing/

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

About the author: Hassan ElBanhawi

2 comments to “Rupture Disc Sizing Document – by Fike”

You can leave a reply or Trackback this post.

  1. Mohammed Mustafa Ahsan - December 30, 2021 at 8:34 pm Reply

    Valuable document

Leave a Reply